Are these fire resistant?
Yes, Our Gutter Guards passed both ASTM: E2768 and ASTM: E84-19b for Extended Duration Surface Burning Characteristics of Building Materials.
Menu
Menu
Yes, Our Gutter Guards passed both ASTM: E2768 and ASTM: E84-19b for Extended Duration Surface Burning Characteristics of Building Materials.
We currently do not have a dealer network set up for this, mainly because it’s not difficult to install, in
Yes, you can read the 25-year warranty here. Note: In coastal areas, warranty is reduced from 10 (ten) years to 5
We recommend using a new/sharp pair of tin snips. Here is a pair that many of our customers have suggested.
Our gutter guard is the only gutter protection system in North America that is UL approved for NSF P151 and
Overall, the 6 IN. version is more expensive because there is 33% more stainless steel micro-mesh in the design. Also,
No. When the gutter guard is installed, it’s extremely difficult to see from the ground because of the sleek low-profile
The most important factor is to ensure that the gutter guard retains between a 5 and 25-degree forward slant (positive
Our expertise is in the relationship between our gutter guards, the gutter, and the roof shingles. Due to variations in
If your roof shingles or tiles are glued/nailed down at the roof edge, do not disturb the shingles, you can
©2024, Raptor Gutter Guard®. All Rights Reserved.
