Our expertise is in the relationship between our gutter guards, the gutter, and the roof shingles. Due to variations in

If your roof shingles or tiles are glued/nailed down at the roof edge, do not disturb the shingles, you can

For steeply pitched roofs (8/12 pitch or greater), it is recommended to drop the slope of the gutter guard to

Under the front aluminum extrusion is a strip of 3M Very High Bond double sided adhesive foam tape which acts

The gutter guard is customizable. If your gutter is between 2 in. and 4 in., you can bend the gutter

You shouldn’t have to remove our gutter guards unless you are repairing or replacing your actual gutter. In that case,

To bend the stainless steel mesh, put the gutter guard between two boards, clamp them down, then manually bend the

If you retain between a 5 and 25 degree forward slant (positive slope) on the gutter guard once installed and